Full - automatic Tracking System Metal Laser Cutter / Metal Cutting Equipment GS-LFD4020 manufacturer from China Wuhan Hans Goldensky Laser System Co., Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: GS-LFD4020

Full-automatic Tracking System Metal Laser Cutting Technology Machine

Full-automatic Tracking System Metal Laser Cutting Technology Machine

Specifications :

Model	GS-LFD4020
Laser source medium	Fiber
Cutting range(L*W)	4000 mm × 2000 mm
Z axle stroke	120 mm
Max positioning speed	120 m/min
X, Y axle Max accelerate speed	1.2 G
Cooling form	water cooling
Laser wavelength	1070nm
Output power of laser source	1500W / 2000W 2500W / 3000W / 4000W (Optional)
Min. cutting gap	≤ 0.1 mm
Positioning accuracy of X, Y and Z axles	± 0.03 mm
Repeated positioning accuracy of X, Y and Z axles	± 0.02 mm
Processing precision of work piece	± 0.1 mm
Kerf harshness	Ra 3.2 - 12.5 μm
Min setting unit	0.001 mm
Control System	Ahead Tech (USA)
Thickness of cutting material (according to material)	0.2-25 mm
Drive model	Imported servo motor
Power requirement	380 V, 50/60 Hz
Total installed capacity	20 - 25 KVA
Working temperature	5 - 45
Continuous working time	24 Hours
Machine weight	About 8150Kgs
Outer dimension	8500mm x 3800mm x 2000mm
Total protection level of power supply	IP54

Description

The Z axis device is a part of the lifting movement of the cutting head. Cutting head of the lifting movement is

controlled by the CNC servo motor,motor drive ball screw,driven by the Z axis of the upper and lower reciprocating

motion to complete, the Z axis of the stroke is 120mm, both ends of the upper and lower ends are used to control

the switch, while the ball screw at both ends with an elastic cushion to ensure the safety of movement. Ball screw

and linear guide rail are used in high quality products, to ensure the accuracy of the transmission.

Z axis can be used as a numerical control axis for its separate interpolation movement, while the X, Y axis linkage,

and can be controlled by cutting the electronic part of the head to meet the needs of different situations. Since the

Z axis is controlled by the numerical control system, the precision of the servo system is relatively high and the

stability is good. Cutting head seal with elastic buffer to ensure the life of cutting head.

The distance from the nozzle to the surface of the plate is detected by the capacitance sensor (installed on the

cutting head) of the Z axis device, and the signal is fed back to the control system, and then the control system is

controlled by the Z axis motor to drive the cutting head. The cutting head has a nut to adjust the focal length, and

can adjust the position of the focus according to the material and thickness of cutting material.

Nozzle is one of the vulnerable parts of the processing process, the user can spare some of the different aperture

nozzle, to facilitate the replacement.

The Z axis is respectively provided with a linear guide rail seat and wire rod base grease nozzle, regular grease.

Widely used for metal-sheet fabrication:

Widely used for metal sheet processing,advertising trademark, advertising character, high/low voltage electrical

cabinet, mechanism parts, kitchenware, cars, mechanical, metal craftwork, saw blade, electronic parts, eye glasses,

spring, circuit board, kettle,medical microelectronics, hardware, knives tool, measurement, instrument,etc.