CNC processing machine laser cladding equipment for metal cladding 

Description:

The laser cladding equipment, produced by Wuhan Hans Goldensky Laser System Co., Ltd, regarded laser as the heat source, using different ways of adding materials placed on the selected substrate coating material, after laser irradiation, the very thin surface of the substrate and adding materials melted at the same time, then rapid solidification formed. After the above processing, the dilution degree is very low, and form a metallurgical bonding surface coating substrate material, thus improved significantly the wear-resisting, corrosion resistance, heat resistance, oxidation resistance and electrical characteristics of the substrate surface.

Compared with surfacing welding, spraying, electroplating and deposition, laser cladding has advantages of small dilution degrees, compact structure, good, suitable for cladding coating and base material, particle size and content change is big, etc.

Specification:

The product is composed with TFL-6K/10K laser source, specific 60000 calories water chiller, CNC processing machine tool, auto powder delivery machine, optical path system and CNC control system.

Note : Single layer perforating, Bottom layer without hole can be realized during the double layer plastic.

Technical parameter of each part

Numerical control machine

One set five axis four linkage numerical control machine tool

Adopting bracket -movement style flight path movement form,with X YZ 3 axis linear motion function and swing function ;machine tool equipped one vertical rotary worktable(A axis ) and anther horizontal rotary worktable(C axis);X,Y.Z and A or C axis form a five axis four linkage processing system .

Machine tool main part working :X×Y×Z=2500mm×1000mm×600mm

Speed of XYZ axis :0~5000mm/min

Positioning precision :±0.1mm/300 mm

Repeat positioning precision:±0.05mm/300 mm

Equipped with ball screw guide rail and slide block for x y z axis

Laser head swing angel :-90⁰~90⁰ (manual)

Vertical rotary worktable:diameter Φ630 ,bearing weight 2T.

Horizontal spin table: max chuck diameter Φ 630 mm (four claws); Height of center: 690 mm;

Max machining workpiece diameter: Φ 1200 mm, the largest workpiece length: 4000 mm;

Horizontal spin station bearing: 10T;

Horizontal rotating speed: 0.05 ~ 10rpm;

With a machine tool base, its installation dimensions:5500mmX1000 mm×250 mm

Vertical and horizontal rotary worktable can be fixed on the machine tool base, using horizontal rotary worktable,

Vertical rotary table can be moved from the base; but no need to move out the horizontal rotary worktable during using the vertical rotary worktable 

Application Industry:

Widely used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, tube fittings, 

automobile, food machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, 

household appliances, kitchen utensils and appliances, craft gifts, tool processing, decoration, advertising and 

other manufacturing industries.